AI-on-the-edge-device

Webinstaller and Console

This page provides the Webinstaller and a live USB Console to your AI-on-the-edge-device.
For further information about AI-on-the-edge-device please go to https://github.com/jomjol/AI-on-the-edge-device.

Notes:

For the installation, make sure to switch the ESP32 to Bootloader mode!
After the installation, a manual reset might be required!
Please note that not all webbrowsers and operating systems support the needed access to USB!
Check the documentation for additional information.
The SD-Card still must be setup separately. This can be done manually or using the new Remote Setup. See the documentation for further instructions!